close icon
Leave a message

Please leave a message for more information!

leave a message Leave a message
Pneumatic cylinder tube
Standing inventory of 2,000 tons, contact us via message or email for details.
Pneumatic cylinder tube

Pneumatic cylinder tube description

Cylinder tube is a kind of high precision steel tube material after cold drawing or hot rolling. Because there is no oxide layer on the inner and outer walls of precision steel pipe, no leakage under high pressure, high precision, high finish, cold bending without deformation, flaring, flattening without cracks and so on, it is mainly used for the production of pneumatic or hydraulic components, such as cylinder or cylinder, can be seamless pipe. The chemical composition of the cylinder tube is carbon C, silicon Si, manganese Mn, sulfur S, phosphorus P, chromium Cr.

Pneumatic cylinder tube processing technic

The cylinder tube is processed by rolling. Because the surface layer has surface residual compressive stress, it is helpful to seal the small cracks on the surface and prevent the expansion of erosion. Thus improving the surface corrosion resistance, and can delay the generation or expansion of fatigue cracks, thus improving the cylinder pipe fatigue strength. By rolling forming, a cold working hardening layer is formed on the rolling surface, which reduces the elastic and plastic deformation of the contact surface of the grinding pair, thus improving the wear resistance of the inner wall of the cylinder tube and avoiding the burn caused by grinding. After rolling, the reduction of surface roughness can improve the fit property.
Rolling machining is a kind of chip free machining. At normal temperature, the plastic deformation of metal is used to flatten the microscopic roughness of the workpiece surface so as to achieve the purpose of changing the surface structure, mechanical characteristics, shape and size. Therefore, this method can achieve the two purposes of polishing and strengthening at the same time, which is unable to do grinding.

Pneumatic cylinder tube chemical composition

Grade C Si Mn P S Cu
ASTM A283 Grade A 0.14 0.15-0.40 0.9 0.035 0.04 0.2
ASTM A283 Grade B 0.17 0.15-0.40 0.9 0.035 0.04 0.2
ASTM A283 Grade C 0.24 0.15-0.40 0.9 0.035 0.04 0.2
ASTM A283 Grade D 0.27 0.15-0.40 0.9 0.035 0.04 0.2

Pneumatic cylinder tube mechanical property

Grade Yield Strength (MPa) Ultimate Tensile Strength (MPa) Elongation at Break (%)
ASTM A283 Grade A 165 310 - 415 27
ASTM A283 Grade B 185 345 - 450 25
ASTM A283 Grade C 205 380 - 515 22
ASTM A283 Grade D 230 415 - 550 20

Pneumatic cylinder tube specification

Product   Parameters

Product Name

Aluminum cylinder tube

Material:

6063  6431  6430 

internal diameter:

16-320mm

Inner diameter tolerance:

H9-H11

Straightness tolerance:

≤1mm/1000mm

Surface roughness:

Ra<0.6

Oxide film thickness:

≥15μm

Hardness of oxide film:

≥ 400HV

Elongation:

≥ 15%

Length:

3-9m or Customized according to customer


main products:

1.Honed Cylinder Tubing

2.Aluminum Pneumatic Cylinder Tube

3.Air  cylinder Tube

4.6430 DNC Aluminum Alloy Profile Tube

Heatingprocessing

Heating—— Honing——Finish drawn——Extrusion——Polishing——Sand blash——oxidation——Final in

Application

Our steel products are mainly used in chemical industry, petrochemical industry, offshore, seawater pipeline, desalination plant, nuclear engineering, paper and pulp industry.

Oil and GasKuwait is a country of petroleum resources with abundant, oil factory also is very broad, respectively, the oil plant are mainly used for refining oil and oil processing.
MarineSubmarine pipelines carry such things as domestic water, waste water, electrical lines, gas lines, communication lines, and outfall or intake systems.
ConstructionBridge materials with high strength, low cost for selecting the main basis, give priority to with development of the traditional steel and concrete.
EnergyEngineering is mainly aiming at the water pollution and solid waste pollution. using the steel pipe to filtrate in order to improve the quality of water.

Factory Display

Factory Display

Tianjin tisco is a one-stop steel pipe supplier for global manufacturers.